Car windshield like glowing so it causes glare in the eyes. Conditions that cause our concentration can be dispersed when driving. If you find a problem with your windshield, you can go to the auto glass repair chandler AZ to fix your windshield perfectly.
A frosted car windshield is caused by mold or scratches due to worn wipers or a layer of crystal dust on the surface of the windshield wiped windshield. Dirt or mildew and wounds on the windshield surface hold back the remaining rainwater.
As a result, when exposed to other vehicle lights, water will break down the beam into several colors. The windshield also seemed to glow. The fix is quite easy, namely by polishing. Only, it must be done correctly and correctly. Like what? The following explanation.
#1. Clean the Windshield First
To start polishing, the first step you need to do is clean the windshield first. Wash all parts of the car with clean water and make sure the water used does not contain acid or has a high salt content. Especially for the windshield do not use car shampoo, soap, or other similar substances. It was intended that these substances come attached to the layer of dirt that will be cleaned.
Shampoo that contains chemicals that will quickly absorb into the windshield pore. The result will appear spots or mold stains on the windshield surface.
Once you are sure the windshield and car are clean, use a really clean chamois cloth – if necessary, use a new one – to dry it. But one thing you should remember, do not to place the car in an area exposed to direct sunlight.
#2. Polishing Properly
After the windshield is completely clean and dry, do the polishing. You can use, an electric polishing tool or with a clean rag – if necessary new – to do polishing. At least three fabrics that you need to prepare. First, apply polishing agent. Second for wiping, and third for cleaning.
Perform cleaning in a unidirectional motion, and the movement of the cloth to rotate when cleaning. Special windshield drugs or polishers can be found at car accessories supply stores. Currently, there are various brands with varying prices.
#3. Use Tobacco Water
If you don’t want to use a manufacturer-made polishing agent, you can use traditional ingredients, namely tobacco. But it must be remembered, do not use tobacco that has been used as cigarettes. Use finely chopped tobacco sold in stores.
Before the tobacco is soaked in water make sure it is not mixed with coarse chips. That is so that it does not cause injury in the windshield when tobacco rubbed into the windshield.
After that, just soaked in water for about 15-20 minutes. Then pour the tobacco water into all parts of the windshield and use tobacco to rub it. Rub the windshield with a clean cloth moistened with a polished motion. Repeat this method several times to clean.
#4. Take Precautionary Steps
The way to avoid the … Read More..